Name: CAMSS 28EX
Availability: OutOfStock

Email This Product

CAMSS 28EX

We'll Send this product's picture, description, and details along with your message.

Recipient Email*
Email multiple recipients by separating email addresses with a comma.
Sender's Email*
Subject*
Message

Info for the CAMSS 28EX

View online

Straight Sidewalls Allow for a Fully-Usable Space
28’ Width x 38’ Length x 17’7" Height, 12’ Eaves
Metal Roll-Up Door – 12’ Width x 8’ Height
No Heavy Equipment Required for Setup

Often used by the U.S. Navy, the CAMSS 28EX is ideal for applications requiring a spacious interior with large roll-up doors. The volume of accessibility supplied by these entrances combined with an impressive amount of interior space makes this shelter system a perfect fit for maintenance bays, repair shops, classrooms, storage facilities, and numerous other possibilities.

View and download full product specifications online.

CAPTCHA

Specifications

CAMSS 28EX Specifications

Email These Product Specifications

We'll send these specifications along with your message.

Recipient Email*
Email multiple recipients by separating email addresses with a comma.
Sender's Email*
Subject*
Message

Specifications for the CAMSS 28EX

View online

Straight Sidewalls Allow for a Fully-Usable Space
28’ Width x 38’ Length x 17’7" Height, 12’ Eaves
Metal Roll-Up Door – 12’ Width x 8’ Height
No Heavy Equipment Required for Setup

National Stock Number:
Part Number: CAMSS-28EX38LP-T (Tan)	Part Number: CAMSS-28EX38LP-G (Green)

General Info	Measures 28’ wide x 38’ long x 17’7” tall with a 12’ eaves Usable area of 1064 square feet 4275 lbs packaged Assembles in 4 hours with a trained six-person crew Used for maintenance, warehouse, equipment coverage
Cover / End Panels	15 oz/sq yd Mil-Spec 44103D fabric Two (2) sets of two (2) 18” ECU ports with a cable port Guy ropes for wind load capability up to 100 MPH Can connect multiple shelters end to end with optional connector flap Fabric includes UV inhibitors and is mold and rot resistant Built in infrared (IR) blocking Fire resistant fabric that meets NFPA 701 Cover and ends are radio frequency welded Each end panel includes mesh attic vent with cover
Personnel Entries	Two (2) aluminum personnel doors (30” W x 80” H) Locking flush mount handle Secured to the shelter without penetration of the fabric
Vehicle Entries	Two (2) metal roll-up doors (12’ W x 8’ H) Manual chain driven operation Vehicle doors install in 2 hours Centered on the ends of the shelter Secured to the shelter without penetration of the fabric
Frame	Made from lightweight, high-strength aluminum Continuous base frame Frame components are interchangeable and color coded to speed assembly Pre-drilled base frame for easy anchoring Base frame has connection points to secure cover to frame Frame is corrosion resistant
Electrical	Two (2) outlet lines with a total of twelve (12) quick connect 110V outlets Twelve (12) quick connect incandescent lights with protective cages
Anchoring	Sixty-six (66) double headed 18” base frame spikes Eight (8) guy ropes and guy spikes
Spares / Repairs	30 day spares/repair Patch materials for cover which are all air transportable without special hazmat requirement
Tools & Equipment	Verified manual Sledge hammer Spike puller
Life Expectancy	Shelter has a usable life of 10 years and a 20 year storage life
Packaging	Three (3) wood pallets Pallet 1: 51″ W x 91″ L x 37″ H – 1780 lbs Pallet 2: 39″ W x 166″ L x 44″ H – 1820 lbs Pallet 3: 40″ W x 48″ L x 48″ H – 675 lbs Forklift ready Export approved 4275 lbs (total weight with shelter)
Engineering & Design	Designed to maintain internal temperature of 40°F to 80°F in ambient temperature of -25°F to 125°F when supported by 5-ton military environmental control units. Engineering calculations demonstrate shelter performance meets a 100 mph wind load of 100 mph per ASCE 7-16 Engineering calculations demonstrate shelter performance meets a ground snow load of 20 psf per ASCE 7-16
	Design loads assume that actual soil conditions will meet one of the following in accordance with ASTM D-2487/2488: Sand gravel / very dense sand Hardpan / Asphalt Fabric weights are nominal *Dimensions are nominal

CAPTCHA

Part Number: CAMSS-28EX38LP-T (Tan)	Part Number: CAMSS-28EX38LP-G (Green)
General Info	Measures 28’ wide x 38’ long x 17’7” tall with a 12’ eaves Usable area of 1064 square feet 4275 lbs packaged Assembles in 4 hours with a trained six-person crew Used for maintenance, warehouse, equipment coverage
Cover / End Panels	15 oz/sq yd Mil-Spec 44103D fabric Two (2) sets of two (2) 18” ECU ports with a cable port Guy ropes for wind load capability up to 100 MPH Can connect multiple shelters end to end with optional connector flap Fabric includes UV inhibitors and is mold and rot resistant Built in infrared (IR) blocking Fire resistant fabric that meets NFPA 701 Cover and ends are radio frequency welded Each end panel includes mesh attic vent with cover
Personnel Entries	Two (2) aluminum personnel doors (30” W x 80” H) Locking flush mount handle Secured to the shelter without penetration of the fabric
Vehicle Entries	Two (2) metal roll-up doors (12’ W x 8’ H) Manual chain driven operation Vehicle doors install in 2 hours Centered on the ends of the shelter Secured to the shelter without penetration of the fabric
Frame	Made from lightweight, high-strength aluminum Continuous base frame Frame components are interchangeable and color coded to speed assembly Pre-drilled base frame for easy anchoring Base frame has connection points to secure cover to frame Frame is corrosion resistant
Electrical	Two (2) outlet lines with a total of twelve (12) quick connect 110V outlets Twelve (12) quick connect incandescent lights with protective cages
Anchoring	Sixty-six (66) double headed 18” base frame spikes Eight (8) guy ropes and guy spikes
Spares / Repairs	30 day spares/repair Patch materials for cover which are all air transportable without special hazmat requirement
Tools & Equipment	Verified manual Sledge hammer Spike puller
Life Expectancy	Shelter has a usable life of 10 years and a 20 year storage life
Packaging	Three (3) wood pallets Pallet 1: 51″ W x 91″ L x 37″ H – 1780 lbs Pallet 2: 39″ W x 166″ L x 44″ H – 1820 lbs Pallet 3: 40″ W x 48″ L x 48″ H – 675 lbs Forklift ready Export approved 4275 lbs (total weight with shelter)
Engineering & Design	Designed to maintain internal temperature of 40°F to 80°F in ambient temperature of -25°F to 125°F when supported by 5-ton military environmental control units. Engineering calculations demonstrate shelter performance meets a 100 mph wind load of 100 mph per ASCE 7-16 Engineering calculations demonstrate shelter performance meets a ground snow load of 20 psf per ASCE 7-16
	Design loads assume that actual soil conditions will meet one of the following in accordance with ASTM D-2487/2488: Sand gravel / very dense sand Hardpan / Asphalt Fabric weights are nominal *Dimensions are nominal

All EX+ Series

CAMSS 80EXT

35EXLP SolarFly

CAMSS 60EX

CAMSS 47EX

CAMSS 47EXEH90

CAMSS 40EX

CAMSS 40EX50LP

CAMSS 40EX50SP

CAMSS 35EXLP

CAMSS 30ISEH48

CAMSS 28EX

Email This Product

CAMSS 28EX

We'll Send this product's picture, description, and details along with your message.

Info for the CAMSS 28EX

Specifications

CAMSS 28EX Specifications

Email These Product Specifications

We'll send these specifications along with your message.

Specifications for the CAMSS 28EX

Request Quote

Contact Info