CAMSS GETT

Part Number	CAMSS-GETT-T (Tan), CAMSS-GETT-G (Green)
Generator	Minimum 18kW of Prime Power at 60Hz Frequency
Environmental Control Unit	5-Ton ECU with 60,000 BTU/H and 10kW Heating
Trailer	Tested Aluminum and Chromoly Steel Trailer with capacity of 2850 lbs
Shelter Model	CAMSS 20TAC26
Dimensions	20′ W x 26′ L x 9’4″ H – 628 lbs Unpackaged
Square Footage	520 Sq. Ft.
Shelter Set Up and Strike Time / People	4 Minutes / 4 People
Typical Uses	Rapid Deployment, TOC, Emergency Response, Disaster Relief
Frame Arches	One-Piece Anodized Aluminum Folding Frame
Cover & End Panels	15 oz/sq yd Mil-Spec 44103D with FR, IR, Blackout, UV and Mildew Resistance
Windows	Eight (8) Mesh Windows with Wind Resistant Blackout Covers
Zipper Entry	Four (4) Double Zipper Entries (36″ x 84″) with Vestibule Connectors
Floor	Non-Slip Mil-Spec 44103D with Vector Proofing and is Removable without Shelter Disassembly
Liner	8 oz/sq yd White Mil-Spec Liner Fabric with FR, Blackout, UV and Mildew Resistance
ECU Ports and Air Sock	Two (2) Sets of Two (2) 18″ ECU Ports with a Cable Port, and Fabric Air Sock with Spot Cooling
Electrical	Eighteen (18) Quick Connect 110V Outlets, Six (6) Ruggedized Fluorescent Tube Lights
Anchoring	Double Headed 18″ Anchoring Spikes and Guy Ropes with Guy Spikes
Extreme Temperatures	Designed to Maintain Inside Temperatures of 40° to 80°F in Ambient Temperatures of -25° to 125° F with an ECU
Wind	Engineered to Withstand Winds of 65 mph and Gusts of 100 mph
Snow	Engineered to Withstand 10 psf Ground Snow Load
Durability	40+ Set-up/Strikes and Be Fully Deployable

Recipient Email*

Email multiple recipients by separating email addresses with a comma.

Sender's Email*

Subject*

Message

Specifications for the CAMSS GETT

View online

Minimum 18kW Generator
5-Ton Environmental Control Unit
CAMSS 20TAC26 Shelter
Trailer is HMMWV Towable with all components on it

Introducing the GETT Trailer system, the all-in-one rapid deployment package. This system is composed of a Generator, Environmental control unit, and a Tent (shelter) all on a HMMWV-towable Trailer (GETT). This package allows for convenient transportation via light military vehicles and comes with everything necessary for quick setup of a working shelter. *This trailer system has a variety of TAC Series shelters to choose from. Please call us to discuss other options. 20TAC-gif

National Stock Number:
Part Number: CAMSS-GETT-T (Tan)	Part Number: CAMSS-GETT-G (Green)

General Info	System includes Generator, Environmental control unit, and Tent (shelter), all on a Trailer (GETT) System is under 4200 lbs Trailer is HMMWV towable and sling load capable 18kW (minimum generator) 60,000 BTU environmental control unit with 10kW of heating Standard shelter (20TAC26) measures 20’ wide x 26’ long x 9’4″ tall Used for rapid deployment situations like a tactical operations center (TOC) or disaster relief
Trailer	General Info Tested at Aberdeen Test Center – report number: ATC 8947 Maximum payload capacity of 2850 lbs Unitized body construction using aircraft grade aluminum and chromoly steel Frame Unitized body construction using aircraft grade aluminum and chromoly steel Outer dimensions of 7’2”W x 13’9”L x 3’9.5”H Curb weight of 1350 lbs Deck height of 34.5” Ground clearance of 16” when laden Drawbar eye height is at 29.5” Drawbar length from the axle to the center of the eye is 105.25” (8’9.25”) Track width of the trailer is 72.5” Running Gear Tires are HMMWV compatible 37X12.50R16.5 Goodyear Wrangler M/T and have 30-mile runflat inserts Wheels are 16.5 x 8.25 two piece steel with a 8 on 6.5” bolt pattern and are HMMWV compatible Brakes are 12” x 2” free backing hydraulic surge brakes with automatic breakaway actuation Independent lever-operated mechanical parking brakes on both left and right sides Fully independent progressive rate trailing arm suspension Axle made from tubular steel Spring media are progressive rate torselastic rubber cords 24V DC sealed lighting system with blackout convoy lights which uses a 12 pin connector that fits with HMMWV systems Telescopic shock absorbers that are direct acting and HMMWV compatible Performance Maximum speed of 55 MPH on primary roads Maximum speed of 35 MPH on secondary roads Maximum speed of 20 MPH off road Departure angle of 27° Turning angle of 80°
Generator - 18kW	General Info Minimum 18 Kilowatts of power at 60 hertz frequency Industrial grade engine Brushless alternator for long life and low maintenance Main circuit breaker for main power connection Circuit breakers for single phase receptacles Electronic governor Long run, internal, single wall XLPE fuel tank Fuel and water separator Durable powder coat finish Single point lifting eye Heavy gauge steel sound attenuated enclosure with internally mounted muffler
Environmental Control Unit - 5 Ton	General Info Provides 60,000 BTU/H Includes 10kW of Heating Runs off of a 3 phase power at 208V and 60 hertz Airflow of 2,000 CFM (approx.) Insulated flex duct is provided that is 16” in diameter and 12’6″ long Flex duct can be stored inside panel Refrigerant type must be R-410A Includes a 60A disconnect switch Comes with a 25’ power cable which is prewired to the unit 15’ remote thermostat cable is included
Shelter System - 20TAC26	General Info Measures 20’ wide x 26’ long x 9’4” tall Usable area of 520 square feet 628 lbs unpackaged One-piece folding frame for quick assembly and strike times Assembles in 4 minutes with a trained four-person crew Fabric Bundle 15 oz/sq yd Mil-Spec 44103D fabric Four (4) double zipper entries (36” W x 84” H) Two (2) sets of two (2) 18” ECU ports with a cable port Total of eight (8) mesh windows with wind resistant blackout covers Guy ropes clip to frame for wind load capability up to 65 MPH Double zipper entries include vestibule connector to connect to other shelters or vestibules Built-in infrared (IR) blocking Fabric includes UV inhibitors and is mold and rot resistant Fire resistant fabric that meets NFPA 701 Cover and ends are radio frequency welded Frame Made from lightweight, high-strength anodized aluminum One-piece folding frame Intuitive frame assembly Pre-drilled base feet for easy anchoring Frame is anodized and corrosion resistant Fabric Floor 15 oz/sq yd non-slip Mil-Spec 44103D vinyl fabric Connects to fabric bundle for vector proofing Liner Shelter includes an internal liner system that is pre-attached to the fabric bundle and helps to maintain internal working conditions of 40° – 80° F in ambient temperatures of -25° to 125° F when supported by a 5-Ton military environmental control unit Air Sock runs the length of the shelter and has spot cooling 8 oz/sq yd Mil-Spec fabric Liner is flame resistant per test method ASTM D6413 After flame – 2 seconds max Char length – 6” max Electrical Two (2) outlet lines with a total of eighteen (18) quick connect 110V outlets Six (6) Ruggedized Fluorescent Tube Lights Anchoring Ten (10) double headed 18” base spikes Ten (10) guy ropes and guy spikes Spares/Repairs 30 day spares/repair Patch materials for cover, liner, and floor which are all air transportable without special hazmat requirement Tools & Equipment Verified manual Sledge hammer Spike puller Life Expectancy Shelter has a usable life for 10 years and a 20 year storage life Packaging Two bags made with 14 oz/sq yd fabric 34” W x 90” L x 20” H, 48” W x 48” L x 24” H 628 lbs between both bags Testing & Engineering Designed to maintain internal temperature of 40°F to 80°F in ambient temperatures of -25°F to 125°F when supported by a 5-ton military environmental control unit Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters 55 mph sustained wind and 65 mph gust per testing of similar type TAC shelter. (NATC testing of CAMSS20TAC20) Engineering calculations demonstrate shelter performance meets a 65 mph sustained wind load and 100 mph gusts per ASCE 7-16. Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters 10 psf snow load per testing of similar type TAC shelter. (NATC testing of CAMSS20TAC20) Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters wind-driven rain test per testing of similar type TAC shelter. (NATC testing of CAMSS20TAC20) Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters blackout test at 100m with naked eye and 300m with night vision goggles per testing of similar type TAC shelter. (U.S. Army Aberdeen Test Center testing of CAMSS20TAC20) 40+ setup/strike and fully deployable per test report of similar type TAC shelter. (U.S. Army Aberdeen Test Center and CAMSS testing of CAMSS20TAC20)
	Design loads assume that actual soil conditions will meet one of the following in accordance with ASTM D-2487/2488: Sand gravel / very dense sand Hardpan / Asphalt Fabric weights are nominal *Dimensions are nominal

CAPTCHA

CAMSS GETT

Profile Drawing

Ruggedized LED Tube Lights

20TAC Cover to Cover Connector

Side to End Boot Connector

Side to Side Boot Connector

Email This Product

CAMSS GETT

We'll Send this product's picture, description, and details along with your message.

Info for the CAMSS GETT

Specifications

CAMSS GETT Specifications

Email These Product Specifications

We'll send these specifications along with your message.

Specifications for the CAMSS GETT

Request Quote

Contact Info

CAMSS GETT

CAMSS GETT

Profile Drawing

Ruggedized LED Tube Lights

20TAC Cover to Cover Connector

Side to End Boot Connector

Side to Side Boot Connector

CAMSS 20TAC20

CAMSS Medical Cargo Trailer

CAMSS 18TAC25

CAMSS 18TAC15

CAMSS 20TAC13

Email This Product

CAMSS GETT

We'll Send this product's picture, description, and details along with your message.

Info for the CAMSS GETT

Specifications

CAMSS GETT Specifications

Email These Product Specifications

We'll send these specifications along with your message.

Specifications for the CAMSS GETT

Request Quote

Contact Info