Part Number: CAMSS-HIT-80EXT120-G (Green) | Part Number: CAMSS-HIT-80EXT120-T (Tan) |
General Info |
- Measures 80’ Wide x 120’ Long x 31’ Tall with 17’ eaves
- Usable area of 9600 square feet
- 47,694 lbs unpackaged
- Assembles in 8 days with a trained crew of 8
- Shelter to fit into 15 standard 463L pallet positions (88”x108”x96”)
- Used for maintenance, warehouse, equipment coverage
|
Cover / End Panels |
- 24oz/sq yd Mil-Spec 44103D fabric
- Total of 12 HVAC ports on cover
- Guy ropes for wind load capability up to 100mph
- Can connect multiple shelters end to end with integrated connector flap
- Built-in infrared (IR) blocking
- Fabric includes UV inhibitors and is mold and rot resistant
- Fire resistant fabric that meets NFPA 701
- Cover and ends are radio frequency welded
|
Personnel Entries |
- Two (2) aluminum personnel doors (30”W x 80” H)
- Locking flush mount handle
- Secured to the shelter without penetration of the fabric
|
Vehicle Entries |
- One vertical lift door 30’ W x 15’ H on each end of shelter, for a total of two (2) vertical lift doors
- Electric operation in under 1 minute with manual backup
- Vehicle doors install in 2 hours
- 17oz/sq yd Mil-Spec 44103D fabric
- Secured to the shelter without penetration of fabric
|
Frame |
- Made from lightweight, high strength aluminum
- Can be assembled without heavy equipment
- Frame components are interchangeable
- Designed for incremental lifting method to maintain highest safety of crew
- All main arches fasting and bolting of main frame is capable of on ground completion to assure properly connected and torqued fasteners and bolts
- Main arches raise into the air simultaneously with horizontal purlins to assure the stability of the frame during erection for safety
- Pre-drilled frame for easy assembly and anchoring
- Frame has connection points to secure cover to frame
- Frame is corrosion resistant
- Vertical and horizontal aluminum bracing in end-walls
- End base includes patented pulley tensioning system to tighten cover
- Tools for lifting and erecting the main arches are included with the shelter system
|
Liner |
- Shelter includes an internal liner system that helps to maintain internal working conditions
- Air socks in the shelter provide improved air circulation
- Liner is flame resistant per test method ASTM D6413
- After flame- 2 seconds max
- Char length- 6” max
|
Electrical |
- One (1) three phase electrical panel
- 125 AMP, 208 Volts, 60 Hertz
- 60 AMP Main breaker
- Four (4) twist lock cable connectors
- Two (2) outlet lines with a total of six (6) quick connect 110v plugs
|
Anchoring |
- Two hundred and eighty two (282) double headed 18” base frame spokes
- Seventy four (74) 36” Screw in Anchors
- Thirty Seven (37) 10” Screw-in Anchors
|
Spares / Repairs |
- 30 day spares/repair kit
- Patch materials for cover and liner which are all air transportable without special hazmat requirements
|
Tools & Equipment |
- Verified manual
- Five (5) mechanical lifts for raising frame
- Packaged on two (2) wood pallets
- 36” W x 48” L x 67” H, 560 lbs. (per set of lifts and pallet)
- Sledge hammer
- Spike puller
- Eight (8) pull over ropes
- Power pull
- Extension cable
- Total of 5 ladders
- One (1) 15’ Heavy duty Aluminum folding adjustable ladder
- Two (2) 21’ Heavy duty Aluminum folding adjustable ladder
- Two (2) 40’ Heavy duty Aluminum folding adjustable ladder
|
Life Expectancy |
- Shelter has usable life of 10 years and a 20 year storage life
|
Packaging |
- Fifteen (15) large wood crates for shelter each at 88” L x 100” W x 58” H
- Total of 5 ladders
- One (1) 15’ Heavy duty Aluminum folding adjustable ladder
- Two (2) 21’ Heavy duty Aluminum folding adjustable ladder
- Two (2) 40’ Heavy duty Aluminum folding adjustable ladder
|
Engineering & Design |
- Engineering calculations demonstrate shelter performance meets a wind load of 100 mph per ASCE 7-16
- Engineering calculations demonstrate shelter performance meets a ground snow load for 20 psf per ASCE 716
|