20EX Hub

Part Number	CAMSS-20EX-HUB-T (Tan), CAMSS-20EX-HUB-G (Green)
Dimensions	20′ W x 24′ L x 10′ H – 1075 lbs. Unpackaged
Square Footage	480 Sq. Ft.
Set-Up and Strike Time / People	20 Minutes / 4 People
Frame Arches	Alumninum Slip-Fit
Cover	15 oz/sq yd Mil-Spec 44103D with FR, IR, Blackout, UV and Mildew Resistance
Zipper Entry	Four (4) double zipper entry (36” W x 84” H) with Tie-offs
Floor	Non-Slip Mil-Spec 44103D with Vector Proofing and is Removable without Shelter Disassembly
Liner	8 oz/sq yd White Mil-Spec Liner Fabric with FR, Blackout, UV and Mildew Resistance
Anchoring	Double headed 18″ Base Frame Spikes and Guy Ropes with Guy Spikes
Extreme Temperatures	Designed to Maintain Inside Temperatures of 40° to 80°F in Ambient Temperatures of -25° to 125° F with an ECU
Wind	Meets TOP 10-2-175 Wind Load Test Per Independent Testing
Snow	Meets TOP 10-2-175 Snow Load Test Per Independent Testing
Durability	20 Set-up/Strikes and Fully Deployable Per Independent Testing

Recipient Email*

Email multiple recipients by separating email addresses with a comma.

Sender's Email*

Subject*

Message

Specifications for the 20EX Hub

View online

Connect a shelter to each side of the hub by the boot connector
20' width x 24' length x 10' height

Expand your shelter layout with the 20EX Hub. The CAMSS 20EX Hub connects between four CAMSS 20EX shelters. Designed to connect to the covers of CAMSS 20EX Shelter Systems. Additionally, the 20EX Hub comes with 2 side to end connectors that allow shelters to connect to the sides of the hub. The Hub measures 20' wide by 24' long by 10' high.

National Stock Number:
Part Number: CAMSS-20EX-HUB-T (Tan)	Part Number: CAMSS-20EX-HUB-G (Green)

General Info	Connect a shelter to each side of the hub Measures 20’ wide x 24’ long x 10’ tall with a 7’ sidewall Usable area of 480 square feet 1075 lbs unpackaged Assembles in 20 minutes with a trained four-person crew Color is item color designated above, which matches shelter color
Cover	15 oz/sq yd Mil-Spec 44103D fabric Boot connectors over entry can be used to connect to other shelters or vestibules Guy ropes for wind load capability up to 100 MPH Can connect multiple shelters end to end with integrated connector flap Built in infrared (IR) blocking Fabric includes UV inhibitors and is mold and rot resistant Fire resistant fabric that meets NFPA 701 Fabric is radio frequency welded Each end panel includes mesh attic vent with cover
Zipper Entries	Centered on each side of the shelter Four (4) double zipper entries 36” wide x 84” high Tie offs to hold door open
Frame	Made from lightweight, high-strength aluminum Continuous base frame to provide vector proofing Frame components are interchangeable and color coded to speed assembly Pre-drilled base frame for easy anchoring Base frame has connection points to secure cover to frame Frame is corrosion resistant
Fabric Floor	15 oz/sq yd non-slip Mil-Spec 44103D vinyl fabric Floor system is secured to the base frame Removable floor cleaning or replacement without shelter disassembly Continuous hook and loop perimeter for vector proofing
Liner	Shelter includes an internal liner system 8 oz/sq yd Mil-Spec fabric Liner is flame resistant per test method ASTM D6413 After flame – 2 seconds max Char length – 6” max
Anchoring	Twenty-five (25) double headed 18” base frame spikes Eight (8) guy ropes and guy spikes
Spares / Repairs	30 day spares/repair Patch materials for cover, liner, and floor which are all air transportable without special hazmat requirement
Tools & Equipment	Verified manual Sledge hammer Spike puller
Life Expectancy	Shelter has a usable life of 10 years and a 20 year storage life
Packaging	Wood crate Forklift ready Export approved 43” W x 101” L x 30” H 310 lbs (empty crate) 1385 lbs (total weight with shelter) Six fit on a 463L pallet
Engineering & Design	Designed to maintain internal temperatures of 40°F to 80°F in ambient temperature of -25°F to 125°F when supported by a 5-ton military environmental control unit. Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters wind load test procedures per independent testing. Engineered to withstand 100 mph wind load per ASCE 7-16. Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters snow load test procedures per independent test. Engineered to withstand 20 psf ground snow load per ASCE 7-16. Met Test Operations Procedure (TOP) 10-2-175 Tents and Shelters blackout test procedures per independent testing of similar type and size shelter. 20 Set-up/Strikes durability and be fully deployable.
	Fabric weights are nominal Dimensions are nominal

CAPTCHA

20EX Hub

Email This Product

20EX Hub

We'll Send this product's picture, description, and details along with your message.

Info for the 20EX Hub

Specifications

20EX Hub Specifications

Email These Product Specifications

We'll send these specifications along with your message.

Specifications for the 20EX Hub

Request Quote

Contact Info

20EX Hub

20EX Hub

20Q Hub

CAMSS 20EX

20EX Medical Extension

CAMSS 20EX MEDICAL

CAMSS 20EX CAMP

CAMSS 20EX KSS (I+F)

CAMSS 20EX ESPEK

Email This Product

20EX Hub

We'll Send this product's picture, description, and details along with your message.

Info for the 20EX Hub

Specifications

20EX Hub Specifications

Email These Product Specifications

We'll send these specifications along with your message.

Specifications for the 20EX Hub

Request Quote

Contact Info