Name: CAMSS 24TAC LME
Availability: OutOfStock

Email This Product

CAMSS 24TAC LME

We'll Send this product's picture, description, and details along with your message.

Recipient Email*
Email multiple recipients by separating email addresses with a comma.
Sender's Email*
Subject*
Message

Info for the CAMSS 24TAC LME

View online

Lightweight Maintenance Enclosure (LME)
24‘ Width x 32’6” Length x 15’9" Height
1150 lbs Unpackaged
780 sq. ft. Shelter
Minimal Setup Time with Few Personnel

Large, yet light weight, the CAMSS 24TAC shelter is the perfect lightweight maintenance enclosure (LME). Designed to meet military requirements, this 780 square foot shelter is under 1200 lbs and has a packed cube of under 100 cubic feet. The shelter is a simple folding frame and 1-piece fabric bundle that can be set up in minutes with a few personnel. Though designed for maintenance, the 24TAC is versatile in its applications.

View and download full product specifications online.

CAPTCHA

Specifications

CAMSS 24TAC LME Specifications

Email These Product Specifications

We'll send these specifications along with your message.

Recipient Email*
Email multiple recipients by separating email addresses with a comma.
Sender's Email*
Subject*
Message

Specifications for the CAMSS 24TAC LME

View online

Lightweight Maintenance Enclosure (LME)
24‘ Width x 32’6” Length x 15’9" Height
1150 lbs Unpackaged
780 sq. ft. Shelter
Minimal Setup Time with Few Personnel

National Stock Number:
Part Number: CAMSS-24TACLMET (Tan)	Part Number: CAMSS-24TACLMEG (Green)

General Info	Measures 24’ wide x 32’6” long x 15’9″ tall with 12’ lower eaves Usable area of 780 square feet 1150 lbs unpackaged Folding frame for quick assembly and strike times Assembles in under 25 minutes with a trained 4-person crew Typically used for maintenance and rapid deployment situations
Fabric Bundle	15 oz/sq yd Mil-Spec 44103D fabric Two (2) personnel double zipper entries (36” W x 84” H) with tie offs Two (2) sliding fabric vehicle entries (24’ W x 10’ H) with tie offs Four (4) sets of two (2) 18” ECU ports with a cable port Total of eight (8) mesh windows with wind resistant blackout covers Guy ropes clip to frame for resistance against strong wind loads Fabric includes UV inhibitors and is mold and rot resistant Fire resistant fabric that meets NFPA 701 Cover and ends are radio frequency welded
Frame	Made from lightweight, high-strength anodized aluminum Folding frame Intuitive frame assembly Stiffeners attach separately to provide full rigidity for harsh environments Pre-drilled base feet for easy anchoring Frame is anodized and corrosion resistant
Electrical	Two (2) outlet lines with a total of eighteen (18) quick connect 110V outlets
Anchoring	Ten (10) double headed 18” base spikes Ten (10) guy ropes and guy spikes
Spares / Repairs	30 day spares/repair Patch materials for cover, which are all air transportable without special hazmat requirement
Tools & Equipment	Verified manual Sledge hammer Spike puller
Life Expectancy	Shelter has a usable life of 10 years and a 20 year storage life
Packaging	Wood crate Forklift ready Export approved 44” W x 102” L x 36” H 350 lbs (each empty crate) 1,500 lbs (total weight with shelter) Four fit on a 463L pallet
Engineering & Design	Engineered to meet wind loads of 55 mph sustained winds with gusts up to 65 mph per ASCE 7-16 Engineered to meet ground snow loads of 10 psf per ASCE 7-16 Designed for 40+ Set-Up/Strikes and be fully deployable
	Design loads assume that actual soil conditions will meet one of the following in accordance with ASTM D-2487/2488: Sand gravel / very dense sand Hardpan / Asphalt Fabric weights are nominal *Dimensions are nominal

CAPTCHA

Part Number: CAMSS-24TACLMET (Tan)	Part Number: CAMSS-24TACLMEG (Green)
General Info	Measures 24’ wide x 32’6” long x 15’9″ tall with 12’ lower eaves Usable area of 780 square feet 1150 lbs unpackaged Folding frame for quick assembly and strike times Assembles in under 25 minutes with a trained 4-person crew Typically used for maintenance and rapid deployment situations
Fabric Bundle	15 oz/sq yd Mil-Spec 44103D fabric Two (2) personnel double zipper entries (36” W x 84” H) with tie offs Two (2) sliding fabric vehicle entries (24’ W x 10’ H) with tie offs Four (4) sets of two (2) 18” ECU ports with a cable port Total of eight (8) mesh windows with wind resistant blackout covers Guy ropes clip to frame for resistance against strong wind loads Fabric includes UV inhibitors and is mold and rot resistant Fire resistant fabric that meets NFPA 701 Cover and ends are radio frequency welded
Frame	Made from lightweight, high-strength anodized aluminum Folding frame Intuitive frame assembly Stiffeners attach separately to provide full rigidity for harsh environments Pre-drilled base feet for easy anchoring Frame is anodized and corrosion resistant
Electrical	Two (2) outlet lines with a total of eighteen (18) quick connect 110V outlets
Anchoring	Ten (10) double headed 18” base spikes Ten (10) guy ropes and guy spikes
Spares / Repairs	30 day spares/repair Patch materials for cover, which are all air transportable without special hazmat requirement
Tools & Equipment	Verified manual Sledge hammer Spike puller
Life Expectancy	Shelter has a usable life of 10 years and a 20 year storage life
Packaging	Wood crate Forklift ready Export approved 44” W x 102” L x 36” H 350 lbs (each empty crate) 1,500 lbs (total weight with shelter) Four fit on a 463L pallet
Engineering & Design	Engineered to meet wind loads of 55 mph sustained winds with gusts up to 65 mph per ASCE 7-16 Engineered to meet ground snow loads of 10 psf per ASCE 7-16 Designed for 40+ Set-Up/Strikes and be fully deployable
	Design loads assume that actual soil conditions will meet one of the following in accordance with ASTM D-2487/2488: Sand gravel / very dense sand Hardpan / Asphalt Fabric weights are nominal *Dimensions are nominal

All TAC Series

18TAC15 Thermacam Fly

Side to Side Boot Connector

Side to End Boot Connector

20TAC Cover to Cover Connector

14TAC Cover to Cover Connector

18TAC Cover to Cover Connector

20TAC End Cap

18TAC End Cap

Brigade Endcap

CAMSS GETT

CAMSS 18TAC15

CAMSS 24TAC LME

Email This Product

CAMSS 24TAC LME

We'll Send this product's picture, description, and details along with your message.

Info for the CAMSS 24TAC LME

Specifications

CAMSS 24TAC LME Specifications

Email These Product Specifications

We'll send these specifications along with your message.

Specifications for the CAMSS 24TAC LME

Request Quote

Contact Info