| National Stock Number: National Stock Number: 8340-01-568-9886 (Tan) | National Stock Number: National Stock Number: 8340-01-568-9891 (Green) |
| Part Number: CAMSS-20QET (Tan) | Part Number: CAMSS-20QEG (Green) |
| General Info |
- Measures 20’ wide x 32’6” long x 10’ tall
- Usable area of 650 square feet
- 950 lbs unpackaged
- Folding main frame that is field configurable into two pieces for quick assembly and ease of transport
- Assembles in under 10 minutes with a trained six-person crew
- Used for billeting, command posts, forward operating bases or rapid deployment situations
|
| Cover / Ends |
- 15+ oz/sq yd Mil-Spec 44103D fabric
- Vestibule connector flaps over entries can be used to connect to other shelters or vestibules
- Includes two (2) sets of two (2) 18” ECU ports with a cable port
- Total of fourteen (14) mesh windows with wind resistant blackout covers
- Twelve (12) guy ropes for high wind
- Can connect multiple shelters with integrated end-to-end connector flap
- Built-in infrared (IR) blocking
- Fabric includes UV inhibitors and is mold and rot resistant
- Fire resistant fabric that meets NFPA 701
- Cover and ends are radio frequency welded
- Each end panel includes a mesh attic vent with cover
|
| Personnel Entries |
- Centered on ends of the shelter
- Two (2) double zipper entry (36” W x 84” H)
- Tie offs to hold door open
|
| Frame |
- Made from lightweight, high-strength aluminum
- Main folding frame that is field configurable into one or two pieces for quick assembly and ease of transport
- Purlins are foldable to allow them to stay connected to the frame
- Intuitive frame assembly
- Pre-drilled base feet for easy anchoring
- Frame includes connection points to secure cover to frame
- Frame is corrosion resistant
- Two (2) uprights provided for each end
|
| Fabric Floor |
- 15+ oz/sq yd non-slip Mil-Spec 44103D vinyl fabric
- Removable for cleaning or replacement without disassembly of shelter
- Continuous hook and loop perimeter for vector proofing
|
| Extreme Temperature Kit |
- Shelter includes an internal liner system that helps to maintain internal working conditions of 40° – 80° F in ambient temperatures of -25° to 125° F when supported by a 5-Ton military environmental control unit
- Air sock runs the length of the shelter and has spot cooling
- 8 oz/sq yd Mil-Spec fabric
- Liner is flame resistant per test method ASTM D6413
- After flame – 2 seconds max
- Char length – 6” max
|
| Electrical |
- Shelter System includes complete internal electrical system
- Single phase electrical panel
- Two (2) GFCI 20 A breakers
- Two(2) 20A breakers
- One (1) light switch with breaker
- Four (4) twist lock cable connectors
- Two (2) outlet lines with a total of twenty-four (24) quick connect 110V outlets
- Ten (10) quick connect LED lights with protective cages
- 50 ft. 20A power cable included
|
| Anchoring and High Wind Kit |
- Seventeen (17) double headed 18” base spikes
- Twelve (12) guy ropes and earth anchors
|
| Spares / Repairs Kit |
- 30 day spares/repair kit
- Patch materials for cover, liner, and floor which are all air transportable without special hazmat requirement
|
| Tools |
- Verified manual
- Sledge hammer
- Spike puller
- Four (4) pull over ropes
|
| Life Expectancy / Warranty |
- Shelter has a usable life of 10 years and a 20 year storage life
|
| Packaging |
- Wood crate
- Forklift ready
- Export approved
- 43” W x 101” L x 32” H
- 310 lbs (crate only)
- 1260 lbs (total weight with shelter)
- Six fit on a 463L pallet
|
| Testing & Engineering |
- Designed to maintain internal temperature of 40°F to 80°F in ambient temperature of -25°F to 125°F when supported by a 5-ton military environmental control unit.
- Wind tested to 80 mph confirmed by test report (NATC Testing)
- Engineering calculations demonstrate shelter performance meets a 100 mph wind load per ASCE 7-16.
- Snow tested to 15 psf confirmed by test report (CAMSS Testing on CAMSS20QE13)
- Engineering calculation demonstrate shelter performance meets a 20 psf ground snow load per ASCE 7-16.
- Tested for 50 Set-Up/Strikes and still be fully deployable (CAMSS Testing)
|
| *Design loads assume that actual soil conditions will meet one of the following in accordance with ASTM D-2487/2488:
- Sand gravel / very dense sand
- Hardpan / Asphalt
*Fabric weights are nominal
*Dimensions are nominal
|
