CAMSS Medical Package

CAMSS 20QE Shelter	Sets up in 10 minutes 650 Sq. feet of utilizable space Customizable options to your needs
Environmental Control Unit	Operational Temperature Range of -10° F to +125° F Non-Tactical

Recipient Email*

Email multiple recipients by separating email addresses with a comma.

Sender's Email*

Subject*

Message

Specifications for the CAMSS Medical Package

View online

CAMSS Medical Package is Equipped with the Following Components:
- Non-tactical Environmental Control Unit
- CAMSS 20QE Shelter

With the Medical Field in mind, CAMSS Shelters introduces our new Medical Package that includes our Non-Tactical ECU and CAMSS 20QE Shelter System that will best fit your needs. This CAMSS20QE Shelter System sets up in minutes and utilizes 650 square feet of area to allow medical facilities the option to set up additional screening areas, isolation tent and patients triage centers. The Non-Tactical ECU fights the weather outside of the tent to regulate the inside temperatures to meet your patient’s needs. 16QE-gif

National Stock Number:

Part Number:

General Info	Measures 20’ wide x 32’6” long x 10’ tall Usable area of 650 square feet 950 lbs unpackaged Folding main frame that is field configurable into two pieces for quick assembly and ease of transport Assembles in under 10 minutes with a trained six-person crew Used for billeting, command posts, forward operating bases or rapid deployment situations
Cover / Ends	15+ oz/sq yd Mil-Spec 44103D fabric Vestibule connector flaps over entries can be used to connect to other shelters or vestibules Includes two (2) sets of two (2) 18” ECU ports with a cable port Total of fourteen (14) mesh windows with wind resistant blackout covers Twelve (12) guy ropes for high wind Can connect multiple shelters with integrated end-to-end connector flap Built-in infrared (IR) blocking Fabric includes UV inhibitors and is mold and rot resistant Fire resistant fabric that meets NFPA 701 Cover and ends are radio frequency welded Each end panel includes a mesh attic vent with cover
Personnel Entries	Centered on ends of the shelter Two (2) double zipper entry (36” W x 84” H) Tie offs to hold door open
Frame	Made from lightweight, high-strength aluminum Main folding frame that is field configurable into one or two pieces for quick assembly and ease of transport Purlins are foldable to allow them to stay connected to the frame Intuitive frame assembly Pre-drilled base feet for easy anchoring Frame includes connection points to secure cover to frame Frame is corrosion resistant Two (2) uprights provided for each end
Fabric Floor	15+ oz/sq yd non-slip Mil-Spec 44103D vinyl fabric Removable for cleaning or replacement without disassembly of shelter Continuous hook and loop perimeter for vector proofing
Extreme Temperature Kit	Shelter includes an internal liner system that helps to maintain internal working conditions of 40° – 80° F in ambient temperatures of -25° to 125° F when supported by a 5-Ton military environmental control unit Air sock runs the length of the shelter and has spot cooling 8 oz/sq yd Mil-Spec fabric Liner is flame resistant per test method ASTM D6413 After flame – 2 seconds max Char length – 6” max
Electrical	Shelter System includes complete internal electrical system Single phase electrical panel Two (2) GFCI 20 A breakers Two(2) 20A breakers One (1) light switch with breaker Four (4) twist lock cable connectors Two (2) outlet lines with a total of twenty-four (24) quick connect 110V outlets Ten (10) quick connect incandescent lights with protective cages 50 ft. 20A power cable included
Anchoring and High Wind Kit	Seventeen (17) double headed 18” base spikes Twelve (12) guy ropes and earth anchors
Spares / Repairs Kit	30 day spares/repair kit Patch materials for cover, liner, and floor which are all air transportable without special hazmat requirement
Tools	Verified manual Sledge hammer Spike puller Four (4) pull over ropes
Life Expectancy / Warranty	Shelter has a usable life of 10 years and a 20 year storage life
Packaging	Wood crate Forklift ready Export approved 43” W x 101” L x 32” H 310 lbs (crate only) 1260 lbs (total weight with shelter) Six fit on a 463L pallet
Testing & Engineering	Designed to maintain internal temperature of 40°F to 80°F in ambient temperature of -25°F to 125°F when supported by a 5-ton military environmental control unit. Wind tested to 80 mph confirmed by test report (NATC Testing) Engineering calculations demonstrate shelter performance meets a 100 mph wind load per ASCE 7-16. Snow tested to 15 psf confirmed by test report (CAMSS Testing on CAMSS20QE13) Engineering calculation demonstrate shelter performance meets a 20 psf ground snow load per ASCE 7-16. Tested for 50 Set-Up/Strikes and still be fully deployable (CAMSS Testing)
	Design loads assume that actual soil conditions will meet one of the following in accordance with ASTM D-2487/2488: Sand gravel / very dense sand Hardpan / Asphalt Fabric weights are nominal *Dimensions are nominal

CAPTCHA