CAMSS 16QE Specifications
Email These Product Specifications
We'll send these specifications along with your message.
[gravityform id=4 title=false description=false ajax=true]| General Info |
- Measures 16′ wide x 32’6″ long x 8′ tall
- Usable area of 520 square feet
- Folding main frame that is field configurable into two pieces for quick assembly and ease of transport
- Assembles in under 10 minutes with a trained six-person crew
- Used for medical, billeting, command posts, forward operating bases or rapid deployment situations
|
| Cover / Ends |
- 15+ oz/sq yd Mill- Spec 44103D fabric
- Vestibule connector flaps over entries can be used to connect other shelters or vestibules
- Includes two (2) sets of two (2) 18” ECU ports with one on each end
- Total of 4 mesh windows with wind resistant blackout covers
- Twelve (12) guy ropes for high wind
- Can connect multiple shelters with integrated end to end connector flaps
- Built-in infrared (IR) blocking
- Fabric includes UV inhibitors and is mold and rot resistant
- Fire resistant fabric that meets NFPA 701
- Cover and ends are radio frequency welded
|
| Personnel Entries |
- Centered on ends of the shelter
- Two (2) double zipper entry (36” W x 84” H)
- Tie offs to hold door open
|
| Frame |
- Made from lightweight, high-strength aluminum
- Main folding frame is field configurable into one or two pieces for quick assembly and ease of transport
- Purlins are foldable to allow them to stay connected to the frame
- Intuitive frame assembly
- Pre-drilled base feet for easy anchoring
|
| Extreme Temperature Kit |
- Shelter includes an internal liner system that helps to maintain internal working conditions of 40° – 80° F in ambient temperatures of -25° to 125° F when supported by a 5-Ton Military environmental control unit
- Air socks run the length of the shelter and has spot cooling
- 8 oz/sq Mil-Spec fabric
- Liner is flame resistant per test method ASTM D6413
- After flame-2 seconds max
- Char length-6” max
|
| Electrical |
- Single phase electrical panel
- Two (2) GFCI 20 A breakers
- Two (2) 20A breaker
- One (1) light switch with breaker
- Four (4) twist lock cable connectors
- Two (2) outlets lines with a total of sixteen (16) quick connect 110V outlets
- Ten (10) quick connect LED lights with protective cages
- 50 ft. 20A power cable included
|
| Anchoring and High Wind Kit |
- Thirty- five (35) double headed 18” base spikes
- Twelve (12) guy ropes and earth anchors
- Six (6) Screw-In Anchors with cables
|
| Spares / Repairs Kit |
- 30 day spares/repair
- Patch materials for cover, liner, and floor which are all air transportable without special hazmat requirement
|
| Tools |
- Verified manual
- Sledge hammer
- Spike puller
- Thirteen (13) guy ropes
|
| Life Expectancy / Warranty |
- Shelter has a usable life of 10 years and a 20 year storage life
|
| Packaging |
- Wood crate
- Forklift Ready
- Export approved
- 102” L x 44” W x 36” H
- 310 lbs (Crate only weight)
- 1115 lbs (Total weight with shelter)
- 4 fit per 463L pallet
|
| Testing & Engineering |
- Designed to maintain internal temperature of 40° F to 80° F in ambient temperature of -25° F to 125° F when supported by a 5-ton military environmental control unit
- Wind tested to 80 mph confirmed by test report (NATC Testing)
- Engineering calculations demonstrate shelter performance meets 100 mph wind load per ASCE 7-16
- Snow tested to 15 psf confirmed by test report (CAMSS Testing on CAMSS20Q
- Engineering calculation demonstrate shelter performance meets a 15 psf ground snow load per ASCE 7-16
- Tested for 50 Set-Up/ Strikes and still be fully deployable (CAMSS Testing)
|
| *Design loads assume that actual soil conditions will meet one of the following in accordance with ASTM D-2487/2488:
Sand gravel / very dense sand
Hardpan / Asphalt
*Fabric weights are nominal
*Dimensions are nominal
|
