CAMSS TAC LT

Shelter Model	CAMSS TAC LT
Part Number	CAMSS-11TAC16LT-G (Green), CAMSS-11TAC16LT-T (Tan)
Dimensions	11′ W x 16′ L x 8′ H – Less than 250 lbs (Separated into 2 Packages)
Square Footage	176 Sq. Ft.
Set-Up and Strike Time / People	5 Minutes / 2 People
Typical Uses	Highly Mobile Operations, Rapid Deployment, TOC, Emergency Response, Disaster Relief
Frame Arches	One-Piece Anodized Aluminum Folding Frame
Cover & End Panels	10 oz/sq yd fabric with FR, UV and Mildew Resistance
Zipper Entry	Two (2) Double Zipper Entries (38″ x 84″) with Tie Offs and Boots
Floor	10 oz/sq yd fabric with Vector Proofing and is Removable without Shelter Disassembly
Electrical	Two (2) outlet lines with a total of six (6) quick connect 110V outlets
Anchoring	Six (6) Anchoring Spikes and Guy Ropes with Guy Spikes
Extreme Temperatures	Designed to Maintain Inside Temperatures of -25° to 125°F in Ambient Temperatures of -25° to 125° F with an ECU
Wind	Engineered to Withstand Winds up to 85 mph per ASCE 7-16
Snow	Engineered to Withstand up to 10 psf Ground Snow Load per ASCE 7-16
Durability	40+ Set-up/Strikes and Fully Deployable

Recipient Email*

Email multiple recipients by separating email addresses with a comma.

Sender's Email*

Subject*

Message

Specifications for the CAMSS TAC LT

View online

Fast, Rugged, and Extremely Lightweight Shelter
11’ Width x 16’ Length x 8’ Height
176 sq. ft. and Weighs Less than 250 lbs
Two Bundles for Easy Transport

Introducing one of the lightest and most rugged shelter per square foot of space ever created, the CAMSS 11TAC16 LT. Weighing under 250 pounds, the CAMSS TAC LT is the easiest to transport and one of the fastest to assemble without compromising the same durability you expect from our TAC series of shelters. This complete shelter can be transported by personnel in two bags. It is also designed for extreme environments of 50 mph winds with 55 mph gusts and temperatures of -25° to +125° F.

National Stock Number:
Part Number: CAMSS-11TAC16LT-G (Green)	Part Number: CAMSS-11TAC16LT-T (Tan)

General Info	Measures 11’ wide x 16’ long x 8’ tall Usable area of 176 square feet Less than 250 lbs unpackaged Two bundles for easy transport One-piece folding frame for quick assembly and strike times Assembles in 5 minutes with a trained two-person crew Used for highly mobile operations, rapid deployment situations, tactical operations center (TOC), emergency response or disaster relief
Fabric Bundle	10+ oz/sq yd fabric Two (2) zipper entries (38” W x 84” H) Guy ropes clip to frame for wind load capability up to 85 mph Fabric includes UV inhibitors and is mold and rot resistant Fire resistant fabric that meets NFPA 701 Each end panel includes a mesh vent
Frame	Made from lightweight, high-strength anodized aluminum One-piece folding frame Intuitive frame assembly Pre-drilled base feet for easy anchoring Frame is anodized and corrosion resistant
Fabric Floor	10+ oz/sq yd non-slip Mil-Spec vinyl fabric Removable floor for cleaning or replacement without disassembly of shelter Continuous hook and loop perimeter for vector proofing
Electrical	Two (2) outlet lines with a total of six (6) quick connect 110V outlets
Anchoring	Six (6) base frame spikes Six (6) guy ropes and guy spikes
Spares/Repair	30 day spares/repair Patch materials for cover, liner, and floor which are all air transportable without special hazmat requirement
Tools & Equipment	Verified manual Sledge hammer
Life Expectancy	Shelter has a usable life of 5 years and a 10 year storage life
Transportation	One fabric bag (15” W x 63.5” L x 9” H) contains frame and anchoring materials One fabric bag (48” W x 69” L x 15” H) contains the fabric components
Packaging	2 Bags and Straps on a Pallet Forklift ready Export ready 50 lbs (packaging only) Less than 300 lbs (total weight with shelter)
Engineering & Design	Designed to operate in temperatures of -25° to 125° F Engineered to withstand winds up to 85 mph per ASCE 7-16 Engineered to withstand up to 10 psf of ground snow load per ASCE 7-16 40+ Set-Up/Strikes and be fully deployable (U.S. Army Aberdeen Test Center and CAMSS Testing on CAMSS20TAC20)
	Weight estimates exclude small tools, patch & spares kit, anchors, and optional lights Design loads assume that actual soil conditions will meet one of the following in accordance with ASTM D-2487/2488: Sand gravel / very dense sand Hardpan / Asphalt Fabric weights are nominal Dimensions are nominal

CAPTCHA

CAMSS TAC LT

Profile Drawing

6kW Generator

Ruggedized LED Tube Lights

Ruggedized Fluorescent Tube Lights

7kW Generator

Email This Product

CAMSS TAC LT

We'll Send this product's picture, description, and details along with your message.

Info for the CAMSS TAC LT

Specifications

CAMSS TAC LT Specifications

Email These Product Specifications

We'll send these specifications along with your message.

Specifications for the CAMSS TAC LT

Request Quote

Contact Info

CAMSS TAC LT

CAMSS TAC LT

Profile Drawing

6kW Generator

Ruggedized LED Tube Lights

Ruggedized Fluorescent Tube Lights

7kW Generator

CAMSS 18TAC15

CAMSS 20TAC13

CAMSS 16EX

Email This Product

CAMSS TAC LT

We'll Send this product's picture, description, and details along with your message.

Info for the CAMSS TAC LT

Specifications

CAMSS TAC LT Specifications

Email These Product Specifications

We'll send these specifications along with your message.

Specifications for the CAMSS TAC LT

Request Quote

Contact Info