Customize the CAMSS 30CP

Custom Specifications

Email These Product Specifications

We'll send these specifications along with your message.

Recipient Email*
Email multiple recipients by separating email addresses with a comma.
Sender's Email*
Subject*
Message

Info for the CAMSS 30CP

Connect a variety of other shelters to this command post
29'6" Width x 32'6" Length

The CAMSS 30CP is ideal as a command post for your operations. Several other shelters can be connected to the CAMSS 30CP by its many boot connectors. The 30CP is a variant of California Medium Shelter System (CAMSS30) which is the Official Medium Shelter System of the United States Air Force, and is widely depended on to support troops around the world. Because of the CAMSS30's extensive testing and real world usage you can be sure that the CAMSS 30CP will be able to handle any environment or situation.

General Info

Measures 29’6” wide x 32’6″ long x 14’9” tall
Usable area of 958 square feet
3180 lbs unpackaged
Assembles in under 2 hours with a trained six-person crew
Used for command posts, TOC, and forward operating bases

Cover / Ends

15 oz/sq yd Mil-Spec 44103D fabric
Includes two (2) sets of two (2) 18” ECU ports with a cable port
Eight (8) mesh windows with wind resistant blackout covers
Guy ropes for high winds
Can connect multiple shelters using connector boots or end to end with integrated connector flap
Built-in infrared (IR) blocking
Fabric includes UV inhibitors and is mold and rot resistant.
Fire resistant fabric meets NFPA 701
Cover and ends are radio frequency welded
Each end panel includes mesh attic vent with cover
Top liner included

Personnel Entries

Eight (8) double zipper entries (36” W x 84” H)
- Tie offs to hold door open
- Boot Connectors to attach other shelters or vestibules

Frame

Made from lightweight, high-strength aluminum
Frame components are interchangeable and color coded to speed assembly
Base frame pre-drilled for easy anchoring
Base frame includes connection points to secure cover to frame
Base Frame is powder coated and corrosion resistant
End base includes patented pulley tensioning system to tighten cover

Fabric Floor

Includes a Mil-Spec 44103D floor system that is secured to base frame
Continuous hook and loop perimeter for vector proofing

Liner

Shelter includes an internal liner system that helps to maintain internal working conditions of 60° – 80° F in ambient temperatures of -55° to 125° F when supported by four military 5-Ton environmental control units (Provide U.S. government lab test with quote demonstrating similar shelter performance maintaining 40° to 80°F with ambient temperatures of -55° to 125°F)
Four (4) air socks with spot cooling
8 oz/sq yd Mil-Spec liner fabric
Liner is flame resistant per test method ASTM D6413
- After flame – 2 seconds max
- Char length – 6” max

Electrical

Single phase electrical panel
- Two (2) GFCI 20A breakers
- Two (2) 20A breakers
- One (1) light switch with breaker
- Four (4) twist lock cable connectors
Two (2) outlet lines with a total of twenty-four (24) quick connect 110V outlets
Ten (10) quick connect incandescent lights with protective metal cages
20 ft. 20A power cable included

Anchoring

Thirty-two (32) Double headed 18” base frame spikes
Twelve (12) Guy ropes and guy spikes
Thirty-two (32) Concrete anchors
Eight (8) earth anchors with quick link

Spares / Repairs

Spares/repair
Patch materials for cover, liner, and floor which are all air transportable without special hazmat requirement

Tools & Equipment

Verified manual
Sledge hammer
Spike puller
Six (6) pull over ropes
Folding extension ladder
Hook tool
3/4” box end wrench
Cover carry panel

Life Expectancy / Warranty

Shelter has a usable life of 10 years and a 20 year storage life
Parts may be ordered through GSA or DLA under cage code: 1M7W1
Parts have been assigned National Stock Numbers to simplify ordering
Shelter includes a standard manufacturer’s warranty

Packaging

Wood crate
Forklift ready and export approved
88” W x 100” L x 58” H
1170 lbs (crate only)
4350 lbs (total weight with shelter)

Testing & Engineering

Tested from -50° to 125° F to maintain inside temperatures of 40° to 80° F with standard military 5-ton ECUs. High heat test conducted with full simulated Saudi Arabia solar load. (Source Selection Testing – McKinley Climatic Laboratories)
Wind load capability testing (Source Selection Testing – Aberdeen Proving Ground)
Snow load capability of 20 psf (Source Selection Review)
Meets naked eye blackout test (Source Selection Testing)
20 setup/strikes and still mission capable (AFOTEC Testing)
Assembles in under two and one half hours (150 minutes) with trained crew of six (AFOTEC Testing)
Tested and passed rain test 40 mph wind with rate of 5 inches per hour (Source Selection Testing – Aberdeen Proving Ground)
Tested to accommodate entry/exit of P-19 fire vehicle (AFOTEC Testing)
Tested to assemble in MOPP-2 and cold weather gear (AFOTEC Testing)

*Design loads assume that actual soil conditions will meet one of the following in accordance with ASTM D-2487/2488:

Sand gravel / very dense sand
Hardpan / Asphalt

*Fabric weights are nominal

*Dimensions are nominal

CAPTCHA

CAMSS 30CP

National Stock Number: 8340-01-677-7139 (TAN)
Part Number: CAMSS30CP-T (Tan)	Part Number: CAMSS30CP-G (Green)