Products - 18/18 - CAMSS Shelters

Email This Product

CAMSS 16Q

We'll Send this product's picture, description, and details along with your message.

Recipient Email*
Email multiple recipients by separating email addresses with a comma.
Sender's Email*
Subject*
Message

Info for the CAMSS 16Q

Compact and rugged shelter system
16’ width x 39’ length x 8’ height (available in other lengths)
House more personnel than the CAMSS 20Q

Compact and portable, yet rugged and dependable is the CAMSS 16Q Shelter System. Based on the design and engineering of its big brother, the CAMSS 20Q Small Shelter System, this shelter is even more sturdy and light weight due to its smaller size. The CAMSS 16Q is a great shelter for those looking to keep square footage to a minimum yet still having all the essentials of a standard CAMSS shelter. The CAMSS 16Q shelter systems are widely used in South America.

View and download full product specifications online.

CAPTCHA

Specifications

CAMSS 16Q Specifications

Email These Product Specifications

We'll send these specifications along with your message.

Recipient Email*
Email multiple recipients by separating email addresses with a comma.
Sender's Email*
Subject*
Message

Specifications for the CAMSS 16Q

View online

Compact and rugged shelter system
16’ width x 39’ length x 8’ height (available in other lengths)
House more personnel than the CAMSS 20Q

National Stock Number:
Part Number: CAMSS-HIT-16Q39T (Tan)	Part Number: CAMSS-HIT-16Q39G (Green)

General Info	Measures 16’ wide x 39’ long x 8’ tall Usable area of 624 square feet 1090 lbs unpackaged Assembles in 30 minutes with a trained four-person crew Typically used for billeting, command posts, and forward operating bases
Cover / Ends	15 oz/sq yd Mil-Spec 44103D fabric Connector flaps around entries can be used to connect to a vestibule Includes two (2) sets of two (2) 18” ECU ports with a cable port Total of eight (8) mesh windows with blackout and wind resistant covers Guy ropes for wind load capability up to 100 MPH Can connect to multiple shelters with integrated end-to-end connector flap Built-in infrared (IR) blocking Fabric includes UV inhibitors and is mold and rot resistant. Fire resistant fabric that meets NFPA 701 Cover and ends are radio frequency welded
Personnel Entries	Two (2) double zipper entries 36” wide x 84” high Tie offs to hold door open
Frame	Made from lightweight, high-strength aluminum Arches are made with 2”x 2” aluminum square tube Frame components are interchangeable and color coded to speed assembly Pre-drilled base frame for easy anchoring Frame includes connection points to secure cover to frame Frame is corrosion resistant
Fabric Floor	15 oz/sq yd non-slip Mil-Spec 44103D vinyl fabric Floor system is secured to base frame Removable for cleaning or replacement without shelter disassembly Continuous hook and loop perimeter for vector proofing
Liner	Shelter includes an internal liner system that helps to maintain internal working conditions of 40° – 80° F in ambient temperatures of -25° to 125° F when supported by a 5-Ton military environmental control unit Air sock runs the length of the shelter and has spot cooling 8 oz/sq yd Mil-Spec fabric Liner is flame resistant per test method ASTM D6413 After flame – 2 seconds max Char length – 6” max
Electrical	Single phase electrical panel Two (2) GFCI 20A breakers Two (2) 20A breakers One (1) light switch with breaker Four (4) twist lock cable connectors Two (2) outlet lines with a total of thirty (30) quick connect 110V outlets Ten (10) quick connect incandescent lights with protective cages 20 ft. 20A power cable included
Anchoring	Thirty-two (32) double headed 18” base frame spikes Fourteen (14) guy ropes and guy spikes
Spares / Repairs	30 day spares/repair
Tools & Equipment	Verified manual Sledge hammer Spike puller Four (4) pull over ropes
Life Expectancy	Shelter has a usable life of 10 years and a 20 year storage life
Packaging	Wood crate Forklift ready Export approved 43” W x 101” L x 32” H 310 lbs (empty crate) 1400 lbs (total weight with shelter) Six fit on a 463L pallet
Testing & Engineering	Designed to maintain internal temperature of 40°F to 80°F in ambient temperature of -25°F to 125°F when supported by a 5-ton military environmental control unit. Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters wind load test of similar type and size shelter. (Wind Test on CAMSS20Q – 20′ x 32’6″) Engineering calculations demonstrate shelter performance meets a 100 mph wind load per ASCE 7-16. Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters snow load test of similar type and size shelter. (Snow Load test on CAMSS20Q – 20′ x 32’6″) Engineering calculation with quote of this shelter demonstrating shelter performance meets a 20 psf ground snow load per ASCE 7-16. 20 Set-Up/Strikes and be fully deployable. Tested similar type and size shelter. (Durability Test on CAMSS20Q – 20 x 32’6″)
	Design loads assume that actual soil conditions will meet one of the following in accordance with ASTM D-2487/2488: Sand gravel / very dense sand Hardpan / Asphalt Fabric weights are nominal *Dimensions are nominal

CAPTCHA

Part Number: CAMSS-HIT-16Q39T (Tan)	Part Number: CAMSS-HIT-16Q39G (Green)
General Info	Measures 16’ wide x 39’ long x 8’ tall Usable area of 624 square feet 1090 lbs unpackaged Assembles in 30 minutes with a trained four-person crew Typically used for billeting, command posts, and forward operating bases
Cover / Ends	15 oz/sq yd Mil-Spec 44103D fabric Connector flaps around entries can be used to connect to a vestibule Includes two (2) sets of two (2) 18” ECU ports with a cable port Total of eight (8) mesh windows with blackout and wind resistant covers Guy ropes for wind load capability up to 100 MPH Can connect to multiple shelters with integrated end-to-end connector flap Built-in infrared (IR) blocking Fabric includes UV inhibitors and is mold and rot resistant. Fire resistant fabric that meets NFPA 701 Cover and ends are radio frequency welded
Personnel Entries	Two (2) double zipper entries 36” wide x 84” high Tie offs to hold door open
Frame	Made from lightweight, high-strength aluminum Arches are made with 2”x 2” aluminum square tube Frame components are interchangeable and color coded to speed assembly Pre-drilled base frame for easy anchoring Frame includes connection points to secure cover to frame Frame is corrosion resistant
Fabric Floor	15 oz/sq yd non-slip Mil-Spec 44103D vinyl fabric Floor system is secured to base frame Removable for cleaning or replacement without shelter disassembly Continuous hook and loop perimeter for vector proofing
Liner	Shelter includes an internal liner system that helps to maintain internal working conditions of 40° – 80° F in ambient temperatures of -25° to 125° F when supported by a 5-Ton military environmental control unit Air sock runs the length of the shelter and has spot cooling 8 oz/sq yd Mil-Spec fabric Liner is flame resistant per test method ASTM D6413 After flame – 2 seconds max Char length – 6” max
Electrical	Single phase electrical panel Two (2) GFCI 20A breakers Two (2) 20A breakers One (1) light switch with breaker Four (4) twist lock cable connectors Two (2) outlet lines with a total of thirty (30) quick connect 110V outlets Ten (10) quick connect incandescent lights with protective cages 20 ft. 20A power cable included
Anchoring	Thirty-two (32) double headed 18” base frame spikes Fourteen (14) guy ropes and guy spikes
Spares / Repairs	30 day spares/repair
Tools & Equipment	Verified manual Sledge hammer Spike puller Four (4) pull over ropes
Life Expectancy	Shelter has a usable life of 10 years and a 20 year storage life
Packaging	Wood crate Forklift ready Export approved 43” W x 101” L x 32” H 310 lbs (empty crate) 1400 lbs (total weight with shelter) Six fit on a 463L pallet
Testing & Engineering	Designed to maintain internal temperature of 40°F to 80°F in ambient temperature of -25°F to 125°F when supported by a 5-ton military environmental control unit. Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters wind load test of similar type and size shelter. (Wind Test on CAMSS20Q – 20′ x 32’6″) Engineering calculations demonstrate shelter performance meets a 100 mph wind load per ASCE 7-16. Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters snow load test of similar type and size shelter. (Snow Load test on CAMSS20Q – 20′ x 32’6″) Engineering calculation with quote of this shelter demonstrating shelter performance meets a 20 psf ground snow load per ASCE 7-16. 20 Set-Up/Strikes and be fully deployable. Tested similar type and size shelter. (Durability Test on CAMSS20Q – 20 x 32’6″)
	Design loads assume that actual soil conditions will meet one of the following in accordance with ASTM D-2487/2488: Sand gravel / very dense sand Hardpan / Asphalt Fabric weights are nominal *Dimensions are nominal

Shop

CAMSS Brigade Layout 8

CAMSS Brigade Layout Zero

CAMSS TAC LT

CAMSS 14TAC15

CAMSS 14TAC32

CALIFORNIA MEDIUM SHELTER SYSTEM (CAMSS30)

CAMSS 18Q32-CT

CAMSS 20Q SMALL SHELTER SYSTEM (SSS)

CAMSS 21Q42-CT

CAMSS 24Q48-CT

CAMSS 26Q39-CT

CAMSS 16Q

Email This Product

CAMSS 16Q

We'll Send this product's picture, description, and details along with your message.

Info for the CAMSS 16Q

Specifications

CAMSS 16Q Specifications

Email These Product Specifications

We'll send these specifications along with your message.

Specifications for the CAMSS 16Q

Request Quote

Contact Info