| Part Number: CAMSS-30ISEH48-T (Tan) | Part Number: CAMSS-30ISEH48-G (Green) |
| General Info |
- Measures 30’ wide x 48’ long x 24’4″ tall with 18’6″ eaves
- Usable area of 1440 square feet
- 8,746 lbs unpackaged
- Assembles in 10 hours with a trained eight-person crew
- Typically used for maintenance, vehicle inspection, or emergency response staging
|
| Cover / End Panels |
- 15 oz/sq yd Mil-Spec 44103D fabric
- Four (4) sets of two (2) 18” ECU ports with a cable port
- Guy ropes for wind load capability up to 100 MPH
- Can connect multiple shelters end to end with optional connector flap
- Built in infrared (IR) blocking
- Fabric includes UV inhibitors and is mold and rot resistant
- Fire resistant fabric that meets NFPA 701
- Cover and ends are radio frequency welded
- Steel cable included to tighten cover around frame
|
| Personnel Entries |
- Two (2) aluminum personnel doors
- (30” W x 80” H)
- Locking flush mount handle
- Secured to the shelter without penetration of the fabric
|
| Vehicle Entries |
- Two (2) vertical lift doors
- (16’ Width x 16’11″ Clearance Height)
- Electric operation in under 1 minute with manual backup
- Vehicle doors install in 2 hours
- Centered on the ends of the shelter
- Secured to the shelter without penetration of the fabric
|
| Frame |
- Made from lightweight, high-strength aluminum
- Continuous base frame
- Frame components are interchangeable and color coded to speed assembly
- Pre-drilled base frame for easy anchoring
- Base frame has connection points to secure cover to frame
- Frame is corrosion resistant
- Vertical and horizontal aluminum bracing in end-walls
|
| Liner |
- Shelter includes an internal liner system that helps to maintain internal working conditions of 40° – 80° F in ambient temperatures of -25° to 125° F when supported by 5-Ton military environmental control units
- Four (4) air socks to provide improved air circulation
- 8 oz/sq yd Mil-Spec fabric
- Liner is flame resistant per test method ASTM D6413
- After flame – 2 seconds max
- Char length – 6” max
|
| Electrical |
- Three phase electrical panel
- 125 Amp, 208 Volts, 60 Hertz
- 60A main breaker
- 30A outlet for welding equipment
- One (1) light switch
- Four (4) twist lock cable connectors
- Two (2) outlet lines with a total of twelve (12) quick connect 110V outlets
- Six (6) LED high bay lights
- 20 ft. 20A power cord included
|
| Anchoring |
- One-hundred ten (110) double headed 18” base frame spikes
- Fourteen (14) guy ropes and guy spikes
|
| Spares / Repairs |
- 30 day spares/repair
- Patch materials for cover, liner, and floor which are all air transportable without special hazmat requirement
|
| Tools & Equipment |
- Verified manual
- Three (3) mechanical lifts for raising frame
- Packaged on one (1) wood pallet
- 36” W x 48” L x 67” H, 816 lbs (Lifts and Pallet)
- Sledge hammer
- Spike puller
- Six (6) pull over ropes
- Power pull
- Extension cable
- Drive Rod
- 15’ Ladder
- 21′ Ladder
|
| Life Expectancy |
- Shelter has a usable life of 10 years and a 20 year storage life
|
| Packaging |
- Two (2) standard medium wood crates
- Forklift ready and export approved
- 88” W x 100” L x 58” H
- 1170 lbs (each empty crate)
- 11,000 lbs (total weight with shelter)
|
| Engineering & Design |
- Designed to maintain internal temperature of 40°F to 80°F in ambient temperature of -25°F to 125°F when supported by 5-ton military environmental control units
- Engineering calculations demonstrate shelter performance meets a wind load of 100 mph per ASCE 7-16
- Engineering calculations demonstrate shelter performance meets a ground snow load of 20 psf per ASCE 7-16
|
| *Design loads assume that actual soil conditions will meet one of the following in accordance with ASTM D-2487/2488:
- Sand gravel / very dense sand
- Hardpan / Asphalt
**Fabric weights are nominal
***Dimensions are nominal
|
