Name: Customize the CAMSS ESPEK Shelter System
Availability: OutOfStock

Custom Specifications

Email These Product Specifications

We'll send these specifications along with your message.

Recipient Email*
Email multiple recipients by separating email addresses with a comma.
Sender's Email*
Subject*
Message

Info for the CAMSS 20EX ESPEK

View this shelter online

Straight Sidewalls Allow for a Fully-Usable Space
20’ Width x 24’ Length x 10’ Height
Attaches to CAMSS CDK

The CAMSS 20EX ESPEK provides room for a dining area with necessary electrical, piping, and ventilation pass-through options. The ESPEK allows users to go straight from the covered serving line of the CAMSS CDK shelter to a covered dining area with 480 square feet of fully usable space due to its straight sidewall design.

General Info

Measures 20’ wide x 24’ long x 10’ tall with a 7’ sidewall
Usable area of 480 square feet
1075 lbs unpackaged
Assembles in 30 minutes with a trained four-person crew
Used for a dining area

Cover / End Panels

15 oz/sq yd Mil-Spec 44103D fabric
Boot connectors over entry can be used to connect to other shelters or vestibules
Two (2) sets of two (2) 18” ECU ports with a cable port
Total of ten (10) mesh windows with wind resistant blackout covers
Guy ropes for wind load capability up to 100 MPH
Can connect multiple shelters end to end with integrated connector flap
Built in infrared (IR) blocking
Fabric includes UV inhibitors and is mold and rot resistant
Fire resistant fabric that meets NFPA 701
Cover and ends are radio frequency welded
Each end panel includes mesh attic vent with cover

Personnel Entries

One (1) aluminum personnel door
- 30” wide x 80” high
- Locking flush mount handle
- Secured to the shelter without penetration of the fabric

Frame

Made from lightweight, high-strength aluminum
Continuous base frame to provide vector proofing
Frame components are interchangeable and color coded to speed assembly
Pre-drilled base frame for easy anchoring
Base frame has connection points to secure cover to frame
Frame is corrosion resistant

Fabric Floor

15 oz/sq yd non-slip Mil-Spec 44103D vinyl fabric
Floor system is secured to the base frame
Removable floor cleaning or replacement without shelter disassembly
Continuous hook and loop perimeter for vector proofing

Extreme Temperature Kit

Shelter includes an internal liner system that helps to maintain internal working conditions of 40° – 80° F in ambient temperatures of -25° to 125° F when supported by a 5-Ton military environmental control unit
Air sock runs the length of the shelter and has spot cooling
8 oz/sq yd Mil-Spec fabric
Liner is flame resistant per test method ASTM D6413
- After flame – 2 seconds max
- Char length – 6” max

Electrical

Shelter System includes complete internal electrical system
Single phase electrical panel
- Two (2) GFCI 20A breakers
- Two (2) 20A breakers
- One (1) light switch with breaker
- Four (4) twist lock cable connectors
Two (2) outlet lines with a total of twelve (12) quick connect 110V outlets
Eight (8) quick connect incandescent lights with protective metal cages
20 ft. 20A power cable included

Anchoring

Twenty-five (25) double headed 18” base frame spikes
Eight (8) guy ropes and guy spikes

Spares / Repairs

30 day spares/repair
Patch materials for cover, liner, and floor which are all air transportable without special hazmat requirement

Tools & Equipment

Verified manual
Sledge hammer
Spike puller

Life Expectancy

Shelter has a usable life of 10 years and a 20 year storage life

Packaging

Wood crate
Forklift ready
Export approved
43” W x 101” L x 30” H
310 lbs (empty crate)
1385 lbs (total weight with shelter)
Six fit on a 463L pallet

Engineering & Design

Designed to maintain internal temperatures of 40°F to 80°F in ambient temperature of -25°F to 125°F when supported by a 5-ton military environmental control unit.
Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters wind load test procedures per independent testing.
Engineered to withstand 100 mph wind load per ASCE 7-16.
Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters snow load test procedures per independent test.
Engineered to withstand 20 psf ground snow load per ASCE 7-16.
Met Test Operations Procedure (TOP) 10-2-175 Tents and Shelters blackout test procedures per independent testing of similar type and size shelter.
20 Set-up/Strikes durability and be fully deployable.

*Design loads assume that actual soil conditions will meet one of the following in accordance with ASTM D-2487/2488:

Sand gravel / very dense sand
Hardpan / Asphalt

*Fabric weights are nominal

*Dimensions are nominal

CAPTCHA

CAMSS 20EX ESPEK

General Info

Measures 20’ wide x 24’ long x 10’ tall with a 7’ sidewall
Usable area of 480 square feet
1075 lbs unpackaged
Assembles in 30 minutes with a trained four-person crew
Used for a dining area

Cover / End Panels

15 oz/sq yd Mil-Spec 44103D fabric
Boot connectors over entry can be used to connect to other shelters or vestibules
Two (2) sets of two (2) 18” ECU ports with a cable port
Total of ten (10) mesh windows with wind resistant blackout covers
Guy ropes for wind load capability up to 100 MPH
Can connect multiple shelters end to end with integrated connector flap
Built in infrared (IR) blocking
Fabric includes UV inhibitors and is mold and rot resistant
Fire resistant fabric that meets NFPA 701
Cover and ends are radio frequency welded
Each end panel includes mesh attic vent with cover

Personnel Entries

One (1) aluminum personnel door
- 30” wide x 80” high
- Locking flush mount handle
- Secured to the shelter without penetration of the fabric

Frame

Made from lightweight, high-strength aluminum
Continuous base frame to provide vector proofing
Frame components are interchangeable and color coded to speed assembly
Pre-drilled base frame for easy anchoring
Base frame has connection points to secure cover to frame
Frame is corrosion resistant

Fabric Floor

15 oz/sq yd non-slip Mil-Spec 44103D vinyl fabric
Floor system is secured to the base frame
Removable floor cleaning or replacement without shelter disassembly
Continuous hook and loop perimeter for vector proofing

Extreme Temperature Kit

Shelter includes an internal liner system that helps to maintain internal working conditions of 40° – 80° F in ambient temperatures of -25° to 125° F when supported by a 5-Ton military environmental control unit
Air sock runs the length of the shelter and has spot cooling
8 oz/sq yd Mil-Spec fabric
Liner is flame resistant per test method ASTM D6413
- After flame – 2 seconds max
- Char length – 6” max

Electrical

Shelter System includes complete internal electrical system
Single phase electrical panel
- Two (2) GFCI 20A breakers
- Two (2) 20A breakers
- One (1) light switch with breaker
- Four (4) twist lock cable connectors
Two (2) outlet lines with a total of twelve (12) quick connect 110V outlets
Eight (8) quick connect incandescent lights with protective metal cages
20 ft. 20A power cable included

Anchoring

Twenty-five (25) double headed 18” base frame spikes
Eight (8) guy ropes and guy spikes

Spares / Repairs

30 day spares/repair
Patch materials for cover, liner, and floor which are all air transportable without special hazmat requirement

Tools & Equipment

Verified manual
Sledge hammer
Spike puller

Life Expectancy

Shelter has a usable life of 10 years and a 20 year storage life

Packaging

Wood crate
Forklift ready
Export approved
43” W x 101” L x 30” H
310 lbs (empty crate)
1385 lbs (total weight with shelter)
Six fit on a 463L pallet

Engineering & Design

Designed to maintain internal temperatures of 40°F to 80°F in ambient temperature of -25°F to 125°F when supported by a 5-ton military environmental control unit.
Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters wind load test procedures per independent testing.
Engineered to withstand 100 mph wind load per ASCE 7-16.
Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters snow load test procedures per independent test.
Engineered to withstand 20 psf ground snow load per ASCE 7-16.
Met Test Operations Procedure (TOP) 10-2-175 Tents and Shelters blackout test procedures per independent testing of similar type and size shelter.
20 Set-up/Strikes durability and be fully deployable.

*Design loads assume that actual soil conditions will meet one of the following in accordance with ASTM D-2487/2488:

Sand gravel / very dense sand
Hardpan / Asphalt

*Fabric weights are nominal

*Dimensions are nominal

Email This Product

Customize the CAMSS 20Q Camp

We'll Send this product's picture, description, and details along with your message.

Recipient Email*
Email multiple recipients by separating email addresses with a comma.
Sender's Email*
Subject*
Message

Info for the CAMSS 20Q CAMP

View online

Ten CAMSS 20Q Shelter Systems
176kW Generator
Ten 5-Ton ECUs
10-Shelter Power Distribution System

The CAMSS 20Q Small Shelter System has been proven in the field for over 2 decades. Designed as a semi-permanent military shelter that can last 15 to 20 years, it is able to withstand extreme temperatures, high winds, and heavy snow loads. It is widely used by all branches of the military and is the United States Air Force Small Shelter System. From Alaska to Guam, this shelter currently accommodates over 30,000 personnel worldwide. Integrating 10 CAMSS 20Q Shelters,176kW generator, 10 ECUs, and power distribution equipment into one package, the CAMSS 20Q Camp saves you time and headaches.

View and download full product specifications online.

CAPTCHA

Email

Customize the CAMSS 20Q Camp

We 'll send a picture, description, and custom specifications along with your message.

Recipient Email*
Email multiple recipients by separating email addresses with a comma.
Sender's Email*
Subject*
Message

Info for the CAMSS 20Q CAMP

View this shelter online

Ten CAMSS 20Q Shelter Systems
176kW Generator
Ten 5-Ton ECUs
10-Shelter Power Distribution System

Ten (10) CAMSS 20Q Small Shelter Systems (Specification is for each)

General Info

Measures 20’ wide x 32’6” long x 10’ tall
Usable area of 650 square feet
1150 lbs unpackaged
Assembles in 30 minutes with trained four-person crew
Used for billeting, command posts, and forward operating bases

Cover / Ends

15 oz/sq yd Mil-Spec 44103D fabric
Vestibule connectors over entries can be used to connect to other shelters or vestibules
Includes two (2) sets of two (2) 18” ECU ports with a cable port
Total of fourteen (14) mesh windows with wind resistant blackout covers
Twelve (12) guy ropes for high wind
Can connect multiple shelters end to end with integrated connector flap
Built-in infrared (IR) blocking
Fabric includes UV inhibitors and is mold and rot resistant.
Fire resistant fabric that meets NFPA 701
Cover and ends are radio frequency welded
Each end panel includes mesh attic vent with cover

Personnel Entries

Centered on ends of the shelter
One (1) aluminum personnel door
- 30” wide x 80” high
- Locking flush mount handle
- Secured to the shelter without penetration of the fabric
One (1) double zipper entry
- 36” wide x 84” high
- Tie offs to hold door open

Frame

Made from lightweight, high-strength aluminum
Arches are made with 2”x 2” aluminum square tube
Continuous base frame to provide vector proofing
Frame components are interchangeable and color coded to speed assembly
Pre-drilled base frame for easy anchoring
Base frame includes connection points to secure cover to frame
Frame is corrosion resistant aluminum

Fabric Floor

15 oz/sq yd non-slip Mil-Spec 44103D
Floor system is secured to the base frame
Removable for cleaning and replacement without disassembly of shelter
Continuous hook and loop perimeter for vector proofing to keep bugs and critters out

Liner

Shelter includes an internal liner system that helps to maintain internal working conditions of 40° – 80° F in ambient temperatures of -25° to 125° F when supported by a 5-Ton military environmental control unit
Air sock runs the length of the shelter and has spot cooling
8 oz/sq yd Mil-Spec fabric
Liner is flame resistance per test method ASTM D6413
- After flame – 2 seconds max
- Char length – 6” max

Electrical

Single phase electrical panel
- Two (2) GFCI 20A breakers
- Two (2) 20A breakers
- One (1) light switch with breaker
- Four (4) twist lock cable connectors
Two (2) outlet lines with a total of twenty-four (24) quick connect 110V outlets
Ten (10) quick connect incandescent lights with protective metal cages
50 ft. 20A power cable included

Anchoring

Thirty-six (36) double headed 18” base frame spikes
Twelve (12) guy ropes and guy spikes

Spares / Repair

30 day spares/repair
Patch materials for cover, liner, and floor which are all air transportable without special hazmat requirement

Tools & Equipment

Verified manual
Sledge hammer
Spike puller
Four (4) pull over ropes

Life Expectancy / Warranty

Shelter has a usable life of 10 years and a 20 year storage life
Shelter includes a standard manufacturer’s warranty

Packaging

Wood crate
Forklift ready and Export approved
43” W x 101” L x 30” H
310 lbs (empty crate)
1460 lbs (total weight with shelter)
Six fit on a 463L pallet

Testing & Egineering

Maintain internal temperatures of 40°F to 80°F in ambient temperature of -25°F to 125°F when supported by a 5-ton military environmental control unit
Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters wind load test
Engineering calculation demonstrate shelter performance will meet a 100 mph wind load per ASCE 7-16
Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters snow load test
Engineering calculations demonstrate shelter performance will meet a 20 psf ground snow load per ASCE 7-16
Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters blowing rain test
Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters blackout test at a minimum distance of 100 meters with the naked eye
Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters blackout test at a minimum distance of 300 meters with night vision goggles
Meets 20 Set-up/Strikes cycles of durability testing per U.S. government test

One (1) 176kW Generator

176kW of prime power, 194kW standby
Tier 4F unless otherwise specified
Frequency 60Hz
Reconectable three phase voltages: 208, 220, 240, 416, 440, 480
Adjustable single phase voltages: 120, 127, 139, 240, 254, 277
Can provide single or three phase power
Electric start
120V GFCI receptacles with breakers
240V twist-lock receptacles with breakers
Reliable heavy-duty diesel generator
Fuel tank capacity of 69 gallons
Sound level of less than 74 decibels at full load from 23’ away
Brushless alternator for long life and low maintenance
Automatic voltage regulator (AVR)
Fuel and water separator for engine longevity
Electronic governor control
Powder coated for weather protection
Warning lights and sounds for abnormal operation
Automatic safety shutdowns
Emergency stop switch
Water heater for cold-weather starts

Ten (10) 5-Ton ECUs (Specification is for each)

ECU tested with standard Small Shelter System to maintain 40° F to 80° F in ambient temperatures of -25° F to +125° F
Ruggedized 60,000 BTU Cooling with Electric Heating
Includes remote control box
Refridgerant R-410A
208/230V 60Hz
Conditioned Air Supply at 2,000 CFM (Approx.)
Operational from -25° F to +132° F
25 ft. power cable
15 ft. remote thermostat cable
Stackable
Flex duct insulated
- 16″ Diameter 3′ Long

One (1) 10-Shelter Power Distribution System

Five (5) five foot 2/0 5 wire female CAM-LOK pigtail sets
Five (5) fifty foot 2/0 5 wire CAM-LOK extension cable sets
Two (2) 300A 3 phase power distribution box
Ten (10) fifty foot L2120 20A 5 wire wetguard extension cables
Ten (10) fifty foot 60A Mil-Spec ECU extension cables

*Design loads assume that actual soil conditions will meet one of the following in accordance with ASTM D-2487/2488:

Sand gravel / very dense sand
Hardpan / Asphalt

*Fabric weights are nominal

*Dimensions are nominal

CAPTCHA

Configurator

Customize the CAMSS 20Q Camp

Customize the CAMSS 30CP

Customize the CAMSS CDK Shelter System

Customize the CAMSS ESPEK Shelter System

Custom Specifications

Email These Product Specifications

We'll send these specifications along with your message.

Info for the CAMSS 20EX ESPEK

CAMSS 20EX ESPEK

Email This Product

Customize the CAMSS 20Q Camp

We'll Send this product's picture, description, and details along with your message.

Info for the CAMSS 20Q CAMP

Email

Customize the CAMSS 20Q Camp

We 'll send a picture, description, and custom specifications along with your message.

Info for the CAMSS 20Q CAMP

Request Quote

Contact Info