| Part Number: CAMSS-30EX-TUAV-DZ1T (Tan) | Part Number: CAMSS-30EX-TUAV-DZ1G (Green) |
| General Info |
- Measures 30′ wide x 58’ long x 15’ tall
- Accomodates Fixed Wing UAVs with a Winspan of up to 24′
- Usable area of 1740 square feet
- 14,436 lbs unpackaged
- Assembles in under 4 hours with a trained six-person crew
- Used for UAV hangar, UAV maintenance, UAV storage
|
| Cover / Ends |
- 15+ oz/sq yd Mil-Spec 44103D fabric
- Includes four (4) sets of two (2) 18” ECU ports with a cable port
- Guy ropes for high winds
- Can connect multiple shelters end to end with integrated connector flap
- Built-in Infrared blocking
- Fabric includes UV inhibitors and is mold and rot resistant.
- Fire resistant fabric meets NFPA 701
- Cover and ends are radio frequency welded
- Top liner included
|
| Personnel and Vehicle Doors |
- All doors secured without zippers, tack stripping, or penetration of the fabric
- One (1) aluminum personnel door
- 32” wide x 80” high
- Locking handle
- One (1) double zipper vehicle entry
- 25’ wide x 10’ high
- centered on one end of the shelter
|
| Frame |
- Made from lightweight, high-strength aluminum
- Frame components are interchangeable and color coded to speed assembly
- Base frame pre-drilled for easy anchoring
- Base frame includes connection points to secure cover to frame
- End base includes patented pulley tensioning system to tighten cover
- Removable end base frame to allow vehicles full access through vehicle doors
|
| Fabric Floor |
- Includes a Mil-Spec 44103D floor system that is secured to base frame
- Continuous hook and loop perimeter for vector proofing
|
| Extreme Temperature Kit |
- Shelter includes an internal liner system that helps to maintain internal working conditions of 40° – 80° F in ambient temperatures of -25° to 125° F when supported by four military 5-Ton environmental control units
- Four (4) air socks with spot cooling
- 8 oz/sq yd Mil-Spec liner fabric
- Liner is flame resistant per test method ASTM D6413
- After flame – 2 seconds max
- Char length – 6” max
|
| Electrical |
- Shelter System includes complete internal electrical system
- Three phase electrical panel
- 125 Amp, 208 Volts, 60 Hertz
- 60 Amp main breaker
- Four (4) twist lock cable connectors
- Sixteen (16) weatherproof outlets 20Amp and One (1) 30 Amp receptacle
- 10 ft. power supply cable
|
| Anchor and High Wind Kit |
- Double headed 18” base frame spikes
- Eighteen (18) Guy ropes and guy spikes
- Concrete anchors
|
| Spares / Repairs Kit |
- Spares/repair kit
- Patch materials for cover and linerwhich are all air transportable without special hazmat requirement
|
| Tools |
- Verified manual
- Sledge hammer
- Spike puller
- Six (6) pull over ropes
- Folding extension ladder
- Step ladder
- Hook tool
- 3/4” box end wrench
- Alignment spud
- Extension cable
- Power pull
- Cover carry panel
- Steel drive rod
- Spike driver
|
| Life Expectancy |
- Shelter has a usable life of 10 years and a 20 year storage life
|
| Packaging |
- Wood crate
- Forklift ready and Export approved
- 88” W x 100” L x 58” H
- 1170 lbs (empty crate)
- 5170 lbs (total weight with shelter)
- One fits on a 463L pallet
|
| Engineering |
- Provide engineering calculations with quote of this shelter demonstrating shelter performance meets a 100 mph wind load per ASCE 7-16.
- Provide engineering calculation with quote of this shelter demonstrating shelter performance meets a 20 psf ground snow load per ASCE 7-16.
- Engineered for 20 Set-Up/Strikes and still be fully deployable
|
