| Part Number: CAMSS47EXEH90-T (Tan) | Part Number: CAMSS47EXEH90-G (Green) |
| General Info |
- Measures 47’ wide x 90’ long x 26’5″ tall with 19’11’ eaves
- Usable area of 4230 square feet
- 17,313 lbs unpackaged
- Assembles in 18 hours with a trained eight-person crew
- Used for maintenance, warehouse, equipment coverage
|
| Cover / End Panels |
- 19 oz/sq yd Mil-Spec 44103D fabric
- Cover uses keder tracks for a quick and safe installation while keeping a tight look
- Four (4) sets of two (2) 18” ECU ports with a cable port
- Guy ropes for wind load capability up to 100 MPH
- Can connect multiple shelters end to end with integrated connector flap
- Built in infrared (IR) blocking
- Fabric includes UV inhibitors and is mold and rot resistant
- Fire resistant fabric that meets NFPA 701
- Cover and ends are radio frequency welded
|
| Personnel Entries |
- Two (2) aluminum personnel doors (30” W x 80” H)
- Locking flush mount handle
- Secured to the shelter without penetration of the fabric
|
| Vehicle Entries |
- One (1) vertical lift door
- (30’ wide x 18’ clear height)
- Electric operation in 90 seconds with manual backup
- Centered on the ends of the shelter
- Secured to the shelter without penetration of the fabric
|
| Frame |
- Made from lightweight, high-strength aluminum
- Continuous base frame
- Frame components are interchangeable and color coded to speed assembly
- Designed for incremental lifting method to simplify main frame erection
- Pre-drilled base frame for easy anchoring
- Base frame has connection points to secure cover to frame
- Frame is corrosion resistant
- Vertical and horizontal aluminum bracing in end-walls
|
| Liner |
- Shelter includes an internal liner system that helps to maintain internal working conditions of 40° – 80° F in ambient temperatures of -25° to 125° F when supported by military environmental control units
- Liner uses keder tracks for a quick and safe installation
- Air sock in each corner of the shelter provide improved air circulation
- 8 oz/sq yd Mil-Spec fabric
- Liner is flame resistant per test method ASTM D6413
- After flame – 2 seconds max
- Char length – 6” max
|
| Electrical |
- Three phase electrical panel
- 125 Amp, 208 Volts, 60 Hertz
- 60A main breaker
- 30A outlet for welding equipment
- One (1) light switch
- Four (4) twist lock cable connectors
- Two (2) outlet lines with a total of twelve (12) quick connect 110V outlets
- Six (6) LED high bay lights
- 50 ft. 20A power cord included
|
| Anchoring |
- Double headed 18” base frame spikes
- Earth anchors
- Guy ropes and guy spikes
|
| Spares / Repairs |
- 30 day spares/repair
- Patch materials for cover, liner, and floor which are all air transportable without special hazmat requirement
|
| Tools & Equipment |
- Verified manual
- Seven (7) Mechanical lifts for raising frame
- Packaged on two (2) wood pallets
- 120” W x 50” L x 54” H, 2,315 lbs (Lifts and Pallet)
- Sledge hammer
- Spike puller
- Six (6) pull over ropes
- Power pull
- Extension cable
- 15’ Heavy duty aluminum folding adjustable extension ladder
- 21’ Heavy duty aluminum folding adjustable extension ladder
|
| Life Expectancy |
- Shelter has a usable life of 10 years and a 20 year storage life
|
| Packaging |
- Five (5) wood crates
- Forklift ready
- Export approved
- 87” W x 99” L x 57” H
- 1170 lbs (each empty crate)
- 23,163 lbs (total weight with shelter)
|
| Engineering & Design |
- Designed to maintain internal temperature of 40°F to 80°F in ambient temperature of -25°F to 125°F when supported by 5-ton military environmental control units.
- Engineering calculations demonstrate shelter performance meets a 100 mph wind load of 100 mph per ASCE 7-16
- Engineering calculations demonstrate shelter performance meets a ground snow load of 20 psf per ASCE 7-16
|
| *Design loads assume that actual soil conditions will meet one of the following in accordance with ASTM D-2487/2488:
- Sand gravel / very dense sand
- Hardpan / Asphalt
*Fabric weights are nominal
*Dimensions are nominal
|
