Customize the CAMSS 20EX KSS

Custom Specifications

Email These Product Specifications

We'll send these specifications along with your message.

Recipient Email*
Email multiple recipients by separating email addresses with a comma.
Sender's Email*
Subject*
Message

Info for the CAMSS 20EX KSS (I+F)

Four CAMSS 20EX40 Shelter Systems
Two Corridors for Connecting Shelters
Four Vestibules for Controled Entry Ways

The CAMSS KSS is an integrated system of shelters designed to provide a dining facility for 550 to 1100 personnel. The CAMSS KSS was developed in cooperation with U.S. Army Natick Laboratories, U.S. Air Force Services, Air Combat Command, and Holloman AFB. This kitchen system provides a more compact, yet more functional kitchen dining facility with greater usable space. The CAMSS KSS may be ordered in three different ways. The KSS I+F (Initial and Follow-on) is designed to support 1100 personnel. The KSS I+F comes with 4 CAMSS 20EX40 shelters, 4 vestibules, and 2 corridors that connect the four shelters. Alternatively, the I and F sections can be ordered independently. The KSS-I (Initial), which can support 550 personnel, comes with two (2) CAMSS 20EX40 shelters and two (2) vestibules for the entrances. The CAMSS KSS-F (Follow-on) is usually purchased as an add-on kit as it allows support for an additional 550 personnel using two (2) CAMSS 20EX40 shelters, 2 vestibules, and 2 corridors that are meant to connect the KSS-F to the KSS-I.

KSS I (Intitial)

Two (2) CAMSS 20EX40 Shelter Systems
Two (2) wide vestibules that fit over the double hard doors for easy access

KSS F (Follow-on)

Two (2) CAMSS 20EX40 Shelter Systems
Two (2) wide vestibules that fit over the double hard doors for easy access
Two (2) wide corridors that allow easy access walkways between the side by side shelters
- Each corridor comes with a light

General Info

Each shelter
- Measures 20’ wide x 40’ long x 10’ tall with a 7’ sidewall
- Usable area of 800 square feet
- 1640 lbs unpackaged
- Assembles in 40 minutes with a trained four-person crew
- Used for kitchen, dining

Cover / End Panels

15 oz/sq yd Mil-Spec 44103D fabric
Boot connectors over entries can be used to connect to other shelters or vestibules
One (1) set of two (2) 18” ECU ports with a cable port per shelter
Total of ten (10) mesh windows with wind resistant blackout covers per shelter
Guy ropes for wind load capability up to 100 MPH
Can connect multiple shelters with vestibule connectors or end to end with integrated connector flap
Built in infrared (IR) blocking
Fabric includes UV inhibitors and is mold and rot resistant
Fire resistant fabric that meets NFPA 701
Cover and ends are radio frequency welded
Each end panel includes mesh attic vent with cover

Personnel Entries

One (1) aluminum personnel double door (Per shelter)
- 48” wide x 80” high
- Locking flush mount handle
- Secured to the shelter without penetration of the fabric
Two (2) double zipper entries (Per shelter)
- 36” wide x 84” high
- Tie offs to hold door open

Frame

Made from lightweight, high-strength aluminum
Continuous base frame to provide vector proofing
Frame components are interchangeable and color coded to speed assembly
Pre-drilled base frame for easy anchoring
Base frame has connection points to secure cover to frame
Frame is corrosion resistant

Fabric Floor

15 oz/sq yd non-slip Mil-Spec 44103D vinyl fabric
Floor system is secured to the base frame
Removable floor cleaning or replacement without shelter disassembly
Continuous hook and loop perimeter for vector proofing

Liner

Shelter includes an internal liner system that helps to maintain internal working conditions of 40° – 80° F in ambient temperatures of -25° to 125° F when supported by 5-Ton military environmental control units
Air sock runs the length of the shelter and has spot cooling
Air sock can connect with air sock of end to end connected shelter
8 oz/sq yd Mil-Spec fabric
Liner is flame resistant per test method ASTM D6413
- After flame – 2 seconds max
- Char length – 6” max

Electrical

Single phase electrical panel
- Two (2) GFCI 20A breakers
- Two (2) 20A breakers
- One (1) light switch with breaker
- Four (4) twist lock cable connectors
Two (2) outlet lines with a total of eighteen (24) quick connect 110V outlets
Ten (10) quick connect incandescent lights with protective metal cages
20 ft. 20A power cable included

Anchoring

Twenty-eight (28) double headed 18” base frame spikes
Twelve (12) guy ropes and guy spikes

Spares / Repairs

30 day spares/repair
Patch materials for cover, liner, and floor which are all air transportable without special hazmat requirement

Tools & Equipment

Verified manual
Sledge hammer
Spike puller

Life Expectancy

Shelter has a usable life of 10 years and a 20 year storage life

Packaging

Two (2) large wood crates
Forklift ready
Export approved
88” W x 100” L x 58” H
1170 lbs each (empty crate)
9020 lbs (total weight with all components)
Two containers fit on a 463L pallet

Engineering & Design

Designed to maintain internal temperatures of 40°F to 80°F in ambient temperature of -25°F to 125°F when supported by a 5-ton military environmental control unit.
Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters wind load test per independent testing.
Engineered to withstand 100 mph wind load per ASCE 7-16.
Meets Test Operations Procedure (TOP) 10-2-175 Tents and Shelters snow load test procedures per independent test.
Engineered to withstand 20 psf ground snow load per ASCE 7-16.
Met Test Operations Procedure (TOP) 10-2-175 Tents and Shelters blackout test procedures per independent testing of similar type and size shelter.
20 Set-up/Strikes durability and be fully deployable.

*Design loads assume that actual soil conditions will meet one of the following in accordance with ASTM D-2487/2488:

Sand gravel / very dense sand
Hardpan / Asphalt

*Fabric weights are nominal

*Dimensions are nominal

CAPTCHA

CAMSS 20EX KSS (I+F)